Shape your drums with notes, not hertz, the way it’s supposed to be done.

Knocktonal is a note-based resonance enhancer, allowing users to boost (or cut) resonances as well as their corresponding harmonic overtones. Simply put, Knocktonal allows you to tune your drums without the need for destructive re-pitching of samples.

Equipped with both Resonance and Subtractive EQ’s, Knocktonal offers complete control over your root notes as well harmonic overtones with up to 30 bands of resonance. It can be used both statically, or dynamically with separate MIDI input channels for both your additive and subtractive EQ’s.

Knocktonal also has a built-in limiter so you can push your signal as loud as you want for a smooth clean sound.

Whether you want to turn your kicks into punchy 808’s, create percussive lead instruments, or simply glue your drums to the key of the song, Knocktonal offers surgical precision over the sound of your drums in the most musical way possible.

The World’s first Intelligent Drum Replacer

When creating Addictive Trigger, we developed smart new technologies (Audio Fingerprint™ and SuperStart™) to make drum replacement easy and painless. Then, we combined these new technologies with some of the best sounds and features from Addictive Drums 2. The result is a fast, accurate and fun way to raise your live-recorded drums to a whole new level.

• Audio Fingerprint drum hit detection
• SuperStart auto-adjustment of settings
• Outstanding drum sounds included
• A complete solution

Accurate and Intelligent

During the research phase of Addictive Trigger, users around the world reported that accurate hit detection is absolutely critical when using drum replacement plugins. Unfortunately, existing triggering technologies tend to have shortcomings that require lots of manual tweaking and correction. We endeavor to make products that are better than what is currently available, and we ended up creating an entirely new method for drum hit detection called Audio Fingerprint. Our new system uses FFT analysis to accurately identify drum sounds even if there is a lot of mic bleed or background noise in the source material. It’s fast, it’s accurate, and we think it’ll change the way you work with live-recorded drums.

What is Audio Fingerprint?

Typical drum replacement tools rely on rudimentary filtering and transient detection, resulting in many false triggers and missed hits. Audio Fingerprint solves this problem by using a novel FFT-based matching system. It is so accurate, it usually has no trouble detecting lightly played ghost notes from background noise while simultaneously rejecting mic bleed and other unwanted sounds.

In addition to detecting low level ghost notes with great accuracy, our Audio Fingerprint system can also differentiate between different stroke types that are played at similar velocities (for example, sidestick and open snare hits). This lets Addictive Trigger play back the correct articulations of samples, even if the incoming source material has different kinds of drum hits with similar peak levels.

SuperStart, SuperFast

Super Smart Automatic Hit Detection

Once you have inserted Addictive Trigger on an audio track, simply click SuperStart and begin playback in your host software. Addictive Trigger listens to your track for several seconds, analyzes the incoming hits and automatically sets a number of different parameters based on the source material. In most cases, this is all you need to do in order to have accurate hit detection happening on your track.

World-Class Sounds Right Out of the Box

In addition to the intelligent detection and workflow features, Addictive Trigger ships with tons of fantastic and easily-tweakable presets that are tailored specifically for drum replacement. Selected from the award winning Addictive Drums library, these sounds are recorded at world-class, impossible-to-book studios like Fairfax Recording (formerly known as Sound City) and United Recording (formerly Ocean Way) and utilize some of the finest gear and most experienced ears in the business. Even if you already have nice drums and a great studio, we think you’ll still find a lot of inspiration and benefit from having these world-class sounds at your fingertips.

A Complete Solution

Addictive Trigger works all on its own and does not require any additional software to provide world-class results. Just fire up the plugin and you're ready to go. Accurate detection and outstanding sounds are included in the box.

Already an AD2 User?

If you own our flagship Addictive Drums 2 software, you’re in luck! You can use all of your favorite presets and ADpak expansion sounds immediately in Addictive Trigger without any need to convert presets or change any settings.

Plays Nice with Other Drum Software

Addictive Trigger supports most popular 3rd party drum instruments as well. You can easily drag-and-drop properly formatted MIDI data out of Addictive Trigger to your favorite instrument and begin working right away.

Not every hit is perfect, not every drum take is flawless, nor every drum sounds nice. But with MDrumReplacer no drum recording is gone for good. No matter if had bad mics positions or you just hate the entire drumset. MDrumReplacer fixes all that in a second. And still, your recordings will sound incredibly live.

Intelligent Drum-Hit Detection 

MDrumEnhancer‘s powerful drum-hit detector works with maximum precision. With just a little help from you, it finds the hits you wish to replace in both single instrument recordings and sometimes even mixed drum sessions.  

Advanced Analysis Technology

MDrumReplacer is equipped with advanced learning feature which thoroughly examines your audio material to identify the most prominent frequencies and sets the resonators accordingly. Listen feature then lets you audition just the filtered signal so that you can adjust the filters easily to set them as precisely as possible.

Replace Completely or Blend

You may replace the drum hits completely or just blend the original with the sample to get extra creative effects. How about enhancing your kick with a bit of an electronic flavour, for example?

Fix the Performance

MDrumReplacer basically includes the whole MDrumLeveler plugin. Therefore you may successfully use MDrumReplacer not just for replacing „bad hits“ but also to iron the drummer‘s performance. Just let the detector find an event and compute its correct level. The processor applies the requested gain to the event. Your drummer will seem to have a firm hand and solid performance. 

Simple Operation

In most cases, you will simply run the detector and choose a sound you want the unwanted hits to be replaced with. Your cheap snare or kick can be replaced with high-end drum within a second. 

Keep it Live

MDrumReplacer uses the mighty MDrummer's sound engine, that means synthesized drums as well as top-quality drum multi-samples which respect the original drummer‘s performance and feel. The performance remains human, not robotic. Although some imperfections can be fixed with built-in drum leveller. 

Tons of Samples 

MDrumReplacer can use the huge MDrummer multi-sample libraries (including Drum Empire 2020) to select a replacement that fits your track the best. At this moment, you may choose from 80 gigabytes of samples. And the editing possibilities are endless. You can finally find the perfect sound!

Boost Or Attenuate Drums In Mixed Music

UNMIX::DRUMS is the world’s first audio plugin that allows attenuating or boosting drums in mixed music, in real-time. Using advanced source signal separation (a.k.a. de-mixing, unmixing, sound extraction, sound isolation) technology under the hood, UNMIX::DRUMS provides frequency dependent drum level control that ranges from up to +18dB of boost to virtually complete removal* – while always sounding great. Whether used on a full mix or on a drum bus, UNMIX::DRUMS can be used to shape and enhance the impact of your drums in a unique new way. Sporting an intuitive multi-level GUI, frequency dependent control of key parameters, a sample accurate sub-bass (re)synthesizer, our high-precision analyzer display, M/S operation and an output limiter, UNMIX::DRUMS opens up exciting new options for mastering, music production, sample-based music creation, mash-up artists, remixers and DJs.

* Actually achievable amounts depend on input signal specifics.

Key Features:

• Source Separation-Based Control of Drum Level in Mixed Music.
• SMOOTH and PUNCHY Boost Modes.
• Sample-Accurate Sub-Bass (Re)Synthesizer.
• Frequency Dependent Control of Key Parameters.
• Intuitive 3-way GUI Design.

Turn It Up (or Down)

UNMIX::DRUMS is your after-the-fact fader for the drums. It takes a mixed music input and allows you to change the level of the drums relative to everything else, in real-time. Attenuate the drums to "headphone bleed" levels, or make them sit squarely in your face – the choice is yours. Adjust DRUM LEVEL and THRESHOLD, done.

Impact Shaping

UNMIX::DRUMS doesn't only work with mixed music – you can slap it onto a drum buss, too. Adjusting DRUM LEVEL frequency dependently - using our slick breakpoint editor in the CURVES view - lets you shape the impact and punch of your drums like never before. Without touching a compressor or transient processor, and even if they're inside a full mix. We call this impact equalization. As drum punch connoisseurs, we're proud to say: It's simply awesome.

Smooth Punch, Punchy Smoothness

Speaking of punch: UNMIX::DRUMS offers two boost modes, SMOOTH and PUNCHY. The SMOOTH mode was designed with a dry, organic sound in mind, for natural sounding medium boost situations, as well as pre-processing for drum extraction applications. PUNCHY produces a very snappy, tight sound that can really make the drums jump at you. Both modes allow boosting the drum reverb, too, SMOOTH focusing on early reflections and PUNCHY on long reverb tails. 

Off The Richter Scale

UNMIX::DRUMS features the world's first and only sample accurate sub-bass (re)synthesizer. Adding punchy and clean low frequency energy to your music or drums has never been easier. Simply raise the BASS SYNTH slider to taste – no level instabilities, false triggers or phase cancellation included. Whether subtly extending the frequency range on a jazz master or creating earth shattering club beats of woofer destruction, the onboard BASS SYNTH delivers – with minimal effort.

Workflow Monster

UNMIX::DRUMS features an intuitive 3-way Graphical User Interface design. Rather than cluttering up your workspace, this layout ensures you see only the parameters you need to see – when and if you need them. With its level compensation feature, M/S processing, a hard-knee limiter, "kill-switch" style drum level macro buttons, and a plethora of carefully hand-crafted factory presets, UNMIX:DRUMS delivers stunning results, easily and in an instant.